Researchers Demonstrate New, More Energy-Efficient Devices Using Gallium Nitride
Engineering researchers have created new high-power electronic devices that are more energy efficient than previous technologies. The devices are made possible by a unique technique for “doping” gallium nitride (GaN) in a controlled way.
“Many technologies require power conversion – where power is switched from one format to another,” says Dolar Khachariya, the first author of a paper on the work and a former Ph.D. student at North Carolina State University. “For example, the technology might need to convert AC to DC, or convert electricity into work – like an electric motor. And in any power conversion system, most power loss takes place at the power switch – which is an active component of the electrical circuit that makes the power conversion system.
“Developing more efficient power electronics like power switches reduces the amount of power lost during the conversion process,” says Khachariya, who is who is now a researcher at Adroit Materials Inc. “This is particularly important for developing technologies to support a more sustainable power infrastructure, such as smart grids.”
“Our work here not only means that we can reduce energy loss in power electronics, but we can also make the systems for power conversion more compact compared to conventional silicon and silicon carbide electronics,” says Ramón Collazo, co-author of the paper and an associate professor of materials science and engineering at NC State. “This makes it possible to incorporate these systems into technologies where they don’t currently fit due to weight or size restrictions, such as in automobiles, ships, airplanes, or technologies distributed throughout a smart grid.”
In a paper published in 2021, the researchers outlined a technique that uses ion implantation and activation to dope targeted areas in GaN materials. In other words, they engineered impurities into specific regions on GaN materials to selectively modify the electrical properties of the GaN only in those regions.
In their new paper, the researchers have demonstrated how this technique can be used to create actual devices. Specifically, the researchers used selectively doped GaN materials to create Junction Barrier Schottky (JBS) diodes.
“Power rectifiers, such as JBS diodes, are used as switches in every power system,” Collazo says. “But historically they have been made of the semiconductors silicon or silicon carbide, because the electrical properties of undoped GaN are not compatible with the architecture of JBS diodes. It just doesn’t work.
“We’ve demonstrated that you can selectively dope GaN to create functional JBS diodes, and that these diodes are not only functional, but enable more power efficient conversion than JBS diodes that use conventional semiconductors. For example, in technical terms, our GaN JBS diode, fabricated on a native GaN substrate, has record high breakdown voltage (915 V) and record low on-resistance.
“We’re currently working with industry partners to scale up production of selectively doped GaN, and are looking for additional partnerships to work on issues related to more widespread manufacturing and adoption of power devices that make use of this material,” Collazo says.
The paper, “Vertical GaN Junction Barrier Schottky Diodes with Near-ideal Performance using Mg Implantation Activated by Ultra-High-Pressure Annealing,” is published in the journal Applied Physics Express. The paper was co-authored by Spyridon Pavlidis, an assistant professor of electrical and computer engineering at NC State; Shashwat Rathkanthiwar, a postdoctoral researcher at NC State; Shane Stein, a Ph.D. student at NC State; Hayden Breckenridge, a former Ph.D. student at NC State; Erhard Kohn, a research associate at NC State and emeritus professor of Ulm University in Germany; Zlatko Sitar, Kobe Steel Distinguished Professor of Materials Science and Engineering at NC State and the founder of Adroit Materials; Will Mecouch, Seiji Mita, Baxter Moody, Pramod Reddy, James Tweedie and Ronny Kirste of Adroit Materials; and Kacper Sierakowski, Grzegorz Kamler and Michał Boćkowski of the Institute of High-Pressure Physics at the Polish Academy of Sciences.
The work was supported primarily by ARPA-E as part of its PNDIODES program, under grants DE-AR0000873, DE-AR000149. The work received additional support from the National Science Foundation, under grants ECCS-1916800, ECCS-1508854, ECCS-1610992, DMR-1508191 and ECCS-1653383; the Office of Naval Research Global’s Naval International Cooperative Opportunities in Science and Technology program, under grant N62909-17-1-2004; and Poland’s National Center for Research and Development (NCBR) under grant TECHMATSTRATEG-III/0003/2019-00.
Note to Editors: The study abstract follows.
“Vertical GaN Junction Barrier Schottky Diodes with Near-ideal Performance using Mg Implantation Activated by Ultra-High-Pressure Annealing”
Authors: Dolar Khachariya, Will Mecouch, Seiji Mita, Baxter Moody, Pramod Reddy, James Tweedie and Ronny Kirste, Adroit Materials, Inc.; Shane Stein, M. Hayden Breckenridge, Shashwat Rathkanthiwar, Erhard Kohn, Spyridon Pavlidis and Ramón Collazo, North Carolina State University; Kacper Sierakowski, Grzegorz Kamler and Michał Boćkowski, Institute of High-Pressure Physics, Polish Academy of Sciences; and Zlatko Sitar, Adroit Materials, Inc. and North Carolina State University
Published: Sept. 5, Applied Physics Express
Abstract: We report a kV class, low ON-resistance, vertical GaN junction barrier Schottky (JBS) diode with selective-area p-regions formed via Mg implantation followed by high-temperature, ultra-high pressure (UHP) post-implantation activation anneal. The JBS has an ideality factor of 1.03, a turn-on voltage of 0.75 V, and a specific differential ON-resistance of 0.6 mΩ·cm2. The breakdown voltage of the JBS diode is 915 V, corresponding to a maximum electric field of 3.3 MV/cm. These results underline that high-performance GaN JBS can be realized using Mg implantation and high-temperature UHP post-activation anneal.
This post was originally published in NC State News.